2″ NPT Tap- 2-11 1/2 NPT Thread Tap NPT Pipe taps

2″ NPT Tap supplier- Taper, Plug and Bottom Taps

2-11 1/2 NPT Thread Tap-2-11.5 NPT Tap in HSS RH LH

• Type: NPT Tap
• Size: 2″
• TPI: 11 1/2
• Material: HSS (High speed steel)  HSS-E
• Ground thread
• Finish: Bright
• Drill Size: 2.188
• Straight flute
• Flute Number: 6

2″-11.5 NPT left hand thread tap also available (RH=right hand LH= left hand), if need right hand thread tap, no need specially specified, if need left hand tap, it should be specified specially.

• Usually the 2″-11 1/2 NPT thread taps are bright without special coating,  if clients need, we also can add special coatings, for example: TiN, TiCN, CrN or TiAlN. After coating, the taps’s working life can be improved greatly.
• Usually these taps supplied by individual ( plug tap is preferred), we also can send by sets ( Taper, plug and bottom)
• After Quenching treatment, the taps have a good wear – resistance.
• Our tap’ cutting effect is good with sharp cutting performance
• Good surface finish
• outstanding quality, high precision and excellent production reliability.
• Our taps can be used in through holes and blind holes.

NPT (American National Standard Taper) taps for general purpose use in a variety of materials conforming to ANSI standards are available. NPT thread taps cut internal threads in pipes.

Check the full range of NPT Thread Taps

payment

We accept payment of T/T(bank transfer), Paypal, Credit Cards, and West Union etc.