1″-5 ACME Tap supplier- Taper, Plug and Bottom Taps
1-5 ACME Thread Tap-1-5 ACME Tap in HSS RH LH
- Type: ACME Tap
- Size: 1″
- TPI: 5
- Material: HSS (High speed steel) HSS-E
- Ground thread
- Class of fit: 2G 3G 4G
- Finish: Bright
- Drill Size: 0.8000
1″-5 ACME left hand thread tap also available (RH=right hand LH= left hand), if need right hand thread tap, no need specially specified, if need left hand tap, it should be specified specially.
These ACME thread taps usually produced according to class of fit: 2G, we also can produce according to 3G or 4G fully according to clients’ requirements.
- Usually the 1-5 ACME thread taps are bright without special coating, if clients need, we also can add special coatings, for example: TiN, TiCN, CrN or TiAlN. After coating, the taps’s working life can be improved greatly.
- Usually these taps supplied by individual ( plug tap is preferred), we also can send by sets ( Taper, plug and bottom)
- After Quenching treatment, the taps have a good wear – resistance.
- Our tap’ cutting effect is good with sharp cutting performance
- Good surface finish
- outstanding quality, high precision and excellent production reliability.
- Our taps can be used in through holes and blind holes.
How to order special ACME taps:
- Specify size and Pitch of ACME thread
- Specify right hand (RH) or left hand (LH)
- Specify class of fit( 2G, 3G or 4G?)
- Specify lead( Single , Double etc)
- Specify material information to be tapped( for example, which kind of material, hardness, grade and machining properties etc)
- Specify hole information to be tapped(Through hole or Blind hole, depth of hole etc)
Check the full range of ACME thread taps
Standard
ASME B1.5-1997
BS 1104:1957
payment
We accept payment of T/T(bank transfer), Paypal, Credit Cards, and West Union etc.
