While inserting a screw into a hole, that hole needs to cut and threaded using a tap. Apart from that to fit the screw on in the hole, you can use different taps. You will find different threading taps and groups of threading taps use to create the holes. However, the tap to be used that depends on what type of hole that you need to create. For example, include holes that go all the way through, but still deep and hole that is very shoal.
While repairing nay loosened and stripped screws, you need to have the perfect tap and die sizes. If you are looking for a good quality tap, you can choose the Thread Tap. Generally, tap and die set comes with taps and dies of different sizes. Those taps are used as per the size and thread form of the screw and holes which needs repairing and threading. Before using the thread taps, you should have known about the numbers and what those numbers are for.
Different types of thread tap that you can use
There are three major types of taps i.e.,
- Taper taps also called starting tap
- Plug Taps.Also called second tap
- Bottoming taps also called third tap
Some important information that you need to know about thread tap
- Apart from different thread forms, these tools are also developed in different sizes so that these can be used for different purposes. However, the sizes stay consistent with standard screws, studs, and bolts. Generally, tap sizes start from zero and can go up to 14. The diameter of the size zero tap measures around .0600. When the tap number increases, the diameter of the taps also increase by .0130.
- Another fact that you need to be aware while buying the Acme Thread Tap is threads per inch and also look into a diameter of the tap. For example, 1/4”-16 ACME thread tap. 1/4” is the diameter, TPI( threads per inch) is 16.
- Class of Thread can divide the UNThread Tap. As per the classifications, A letter represents the screw and B letter is for the nuts. If going further into it. There are three different classes.(1A,2A,3A, 1B,2B,3B). These all are the mensuration of looseness or tightness of the thread fit. As the number increases, as does the tightness of the fit. You can take an example like Thread has a 2A screw and a 2B hole. The different classes are there to explain about the tolerances which control how closely a threaded screw fits into its threaded. This particular term is used for threaded assemblies.
If you are looking for the best quality thread tap for accurate measurement, you will find one from gaugestools.com. You will get the best products at reasonable prices.
